Solder Sleeve Wire Splice Terminators - 410 Pack
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Quality Filament without breaking the bank

Shop Kobee PLA+
  • Free Delivery
    Over $120
  • Low Prices
  • Awesome Support
  • 100%
    Australian Owned

Solder Sleeve Wire Splice Terminators - 410 Pack

Available: In Stock
$13.99

Kobees low melt solder sleeve connectors are perfect for connecting two wires together without the need for crimp tools or traditional cumbersome twist and solder techniques.

With the use of a hot glue gun or lighter you can quickly create a fast, waterproof and electrically reliable fully insulated connection


Features
  • Fully Insulated Connection
  • Doesn't require crimping tools or solder
  • Fast, Waterproof and electrically reliable connection
  • 2:1 Ratio Heat Shrink


Specifications

Yellow Blue Red White
Length 40mm 40mm 40mm 26mm
Diameter 6mm 4.5mm 2.7mm 1.7mm
Wire Range (AWG) 12-10 16-14 22-18 26-24
Wire Range (mm2 4.0-6.0mm2 1.5-2.5mm2 0.5-1.0mm2 0.25-0.34mm2


Package Contents

  • 60 x 0.25-0.34mm2 (White) Solder Sleeves
  • 60 x 0.5-1.0mm2 (Red) Solder Sleeves
  • 60 x 1.5-2.5mm2 (Blue) Solder Sleeves 
  • 20 x 4.0-6.0mm2 (Yellow) Solder Sleeves
  • 6 Meters x 2mm 2:1 Black Heat Shrink


Instructions

  1. Strip both ends of the wires you want to connect
  2. Add a properly sized connector down one side (much like you would add some heat-shrink tubing)
  3. Twist the exposed wires together.
  4. Slide the connector so that the ring of solder is in place around the bare wires.
  5. Heat up with a heat gun (preferred) or lighter and watch the tubing shrink and the solder flow into the connection. Make note that the tubing will begin to shrink first, and after a little time the the solder will soften and begin to flow around the wires. 
  6. Hold the connection until the solder and connector has cooled

Kobees low melt solder sleeve connectors are perfect for connecting two wires together without the need for crimp tools or traditional cumbersome twist and solder techniques.

With the use of a hot glue gun or lighter you can quickly create a fast, waterproof and electrically reliable fully insulated connection


Features
  • Fully Insulated Connection
  • Doesn't require crimping tools or solder
  • Fast, Waterproof and electrically reliable connection
  • 2:1 Ratio Heat Shrink


Specifications

Yellow Blue Red White
Length 40mm 40mm 40mm 26mm
Diameter 6mm 4.5mm 2.7mm 1.7mm
Wire Range (AWG) 12-10 16-14 22-18 26-24
Wire Range (mm2 4.0-6.0mm2 1.5-2.5mm2 0.5-1.0mm2 0.25-0.34mm2


Package Contents

  • 60 x 0.25-0.34mm2 (White) Solder Sleeves
  • 60 x 0.5-1.0mm2 (Red) Solder Sleeves
  • 60 x 1.5-2.5mm2 (Blue) Solder Sleeves 
  • 20 x 4.0-6.0mm2 (Yellow) Solder Sleeves
  • 6 Meters x 2mm 2:1 Black Heat Shrink


Instructions

  1. Strip both ends of the wires you want to connect
  2. Add a properly sized connector down one side (much like you would add some heat-shrink tubing)
  3. Twist the exposed wires together.
  4. Slide the connector so that the ring of solder is in place around the bare wires.
  5. Heat up with a heat gun (preferred) or lighter and watch the tubing shrink and the solder flow into the connection. Make note that the tubing will begin to shrink first, and after a little time the the solder will soften and begin to flow around the wires. 
  6. Hold the connection until the solder and connector has cooled